Smooth-Cast™ 300
Fast Set Bright White Resin
The Smooth-Cast™ 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a 1A:1B by volume or 100A:90B by weight mix ratio. The differences between them are pot life and demould time.
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
100A:90B
Mix Ratio By Weight
-
3 minutes
Pot Life
-
10 minutes
Cure Time
-
70 D
Shore Hardness
These resins readily accept fillers (such as URE-FIL™ 3 from Smooth-On) and can be colored with SO-Strong™, UVO™ or Ignite™ colour tints (Smooth-Cast™ 325 series accepts pigments better than the Smooth Cast™ 300 series). Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for Smooth-Cast™ 300 Series Liquid Plastics include reproducing small to medium size sculptures, making prototype models, special effect props and decorative jewelry.
Videos
Fake Food Challenge - Molding and Casting Broccoli?
How To Cast Resin Using Smooth-Cast® 300 White Urethane Plastic
