TASK™ 7
Flame Resistant Urethane Resin
Flame Out™ is a low viscosity, fast set casting resin that meets UL 94 V-O requirements for flame resistance. It does not contain mercury, TDI or MOCA. Mix ratio is 1A:1B by volume. Pot life is 2.5 min. and demould time is 10 min. at 73°F / 23°C (depending on mass).
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
104A:100B
Mix Ratio By Weight
-
2.5 minutes
Pot Life
-
10 minutes
Cure Time
-
73 D
Shore Hardness
-
Off-White
Colour
Fully cured Flame Out™ material is tough, durable, machinable and paintable. It has much higher physical and performance properties than any other flame rated urethane available anywhere. Vibrant colors and colour effects are possible by adding SO-Strong™, UVO™, or Ignite™ colour tints. Applications for Flame Out™ include making flame resistant prototype and architectural models, model toys, theme park and stage elements, durable miniatures and special effect props. Material can also be used for potting and encapsulation applications.
Videos
