XTC-3D™
High Performance 3D Print Coating
XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy. Inexpensive to use – 1 oz covers 100+ square inches.
Quick Tech Data
-
2A:1B
Mix Ratio By Volume
-
100A:42B
Mix Ratio By Weight
-
Clear (Slightly Yellow In Thick Sections)
Colour
90% Time & Labor Savings: XTC-3D™ fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated. Coat any 3D Print Surface - XTC-3D™ can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper. XTC-3D™ does not contain VOC’s, phthalates or phosphates.
*Please enquire for costings for shipping outside mainland UK
Videos
Making a Platinum Silicone Mold of an SLA Printed UV-Cure Model
How To Add Color And Effects To a 3D Printed Part Using XTC-3D Coating
How To Coat a Flower With Resin
Smoothing the Surface of a 3D Printed Model Using XTC-3D® Coating
