Econ™ 80
Lower Cost Shore 80A Urethane Rubber
Econ™ 80 is an economical Shore 80A urethane rubber suitable for a variety of mold making and industrial applications. It is a lower cost, faster cure alternative to our popular PMC®-780. Physical properties are lower vs. PMC®-780. This is a no odour system that features a 1A:1B mix ratio and a low viscosity for easy mixing and pouring. Working time is about 13 minutes at room temperature, handling time is 6 hours and rubber cures overnight.
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
13 minutes
Pot Life
-
24 hours
Cure Time
-
80 A
Shore Hardness
-
Translucent
Colour
Material Documents
Product Documents - Data Sheet / Health & SafetyEcon™ 80 is translucent and easily coloured with SO-Strong™ or Ignite™ colourants. Econ™ 80 is used to make short run molds for casting concrete and resins, concrete stamping pads, rubber mechanical parts, coating fabrics, pour-in-place gaskets for industrial equipment and burial vaults. Important: To minimize air bubbles in cured rubber, vacuum degassing is recommended.
Videos
