Mold Max™ STROKE
Brushable Silicone
Mold Max™ STROKE is a brushable tin silicone rubber that self-thickens for making fast brush-on moulds of almost any model. Properly applied, it will hold a vertical surface and will reproduce the finest detail. Mixed 100A:10B by weight, rubber quickly develops thixotropy and can be applied with a brush or spatula. Working time is 30 minutes, re-coat time is 45 minutes and cure time after the final layer has been applied is 16 hours at room temperature.
Quick Tech Data
-
100A:10B
Mix Ratio By Weight
-
30 minutes
Pot Life
-
16 hours
Cure Time
-
White
Colour
-
30 A
Shore Hardness
Material Documents
Product Documents - Data Sheet / Health & Safety
Mold Max™ STROKE silicone will not stick to most surfaces and will cure with negligible shrinkage to a strong, flexible Shore 30A rubber. 4 thin layers is all that is necessary to make a strong and durable production mould for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). Applications include reproducing sculpture, architectural restoration, candle moulds, etc.
