Mold Star™ 40T
Translucent 1A:1B By Volume Silicone
Mold Star™ rubbers are easy to use addition cure silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones feature relatively low viscosities and vacuum degassing is not required for most applications.
Mold Star™ 40T has a 20 minute pot life and 3hr cure time.
Cured Mold Star™ 40T is skin safe and certified by an independent laboratory.
Quick Tech Data
-
1A:1B
Mix Ratio By Volume
-
20 minutes
Pot Life
-
3 hours
Cure Time
-
40 A
Shore Hardness
Mold Star™ 40T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Moulds made with Mold Star™ will last a long time in your mould library and are good for casting wax, gypsum, resins and other materials.
Mold Star™ 40T silicone can be thickened with Thi-Vex™ thickener for brush-on application and effects. An infinite number of colour effects can be achieved by adding Silc Pig™ silicone pigments or Cast Magic™ effects powders.
Videos
Making a Platinum Silicone Mold of an SLA Printed UV-Cure Model
How to Make a Silicone Mold of 3D Printed PLA featuring Mold Star 20T Silicone
