Follow Us on our Social Networks
Inhibit X™
Cure Inhibition Reducer
Inhibit XTM is a single component, low-viscosity liquid that provides an added measure of protection against cure inhibition when pouring addition cure silicone rubbers over many surfaces including sulfur clay, instant adhesives, tapes, wood surfaces, some plastics, SLA resins and others.
Recommended: to ensure surface compatibility, conduct a small-scale test on a similar surface before using on a valuable model. This product has a limited shelf life and should be used as soon as possible.
Material Documents
Product Documents - Data Sheet / Health & Safety
Apply at least two coats of Inhibit X® - Using a soft brush, apply a thorough coating over all surfaces that will contact rubber, including into intricate detail, and let dry. Follow with another application and let dry. Follow with an application of Ease ReleaseTM 200.
If applying by Inhibit XTM with non-aerosol pump spray - apply a light mist coating to all surfaces that will contact rubber, brush over all surface areas and let dry. Follow with second light mist coating. Follow with an application of Ease ReleaseTM 200.
Addition cure(platinum) silicones are especially sensitive to sulfur-bearing clays and tin-cured silicones. Apply 3 coatings of Inhibit XTM prior to applying release agent.
*Please enquire for costings for shipping outside mainland UK
In stock
SKU
inhibit-x