Smooth-Sil™ 936
Shore 36A Addition Cure Silicone Rubber
Smooth-On Smooth-Sil™ Addition Cure Silicones cure at room temperature with negligible shrinkage. With different hardnesses to choose from, Smooth-Sil™ products offer tremendous versatility and are suitable for making production moulds of any configuration, large or small.
Quick Tech Data
-
100A:10B
Mix Ratio By Weight
-
60 minutes
Pot Life
-
24 hours
Cure Time
-
36 A
Shore Hardness
-
Blue
Colour
These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent.
Videos
Making a Silicone Mold of a 3D Printed Part and Casting a Resin Copy
